Fuente de alimentación H2U 2U
Esta fuente de alimentación de nivel industrial con rango completo de entrada de CA ofrece una capacidad total de potencia de hasta 600 vatios y utiliza un diseño de circuito APFC (corrección activa del factor de potencia). Tiene componentes de calidad incorporados para proporcionar una eficiencia 80 PLUS® y fiabilidad a largo plazo. Este producto cumple las normas IEC1000-3-2 y EN61000-3-2 sobre armónicos PFC y el control inteligente y silencioso del ventilador (S2FC) patentado por Seasonichace que esta unidad funcione con bajos niveles de ruido. Y lo que es más importante, la SS-600H2U es una fuente de alimentación totalmente modular que hará que la instalación sea sencilla y fácil.
- EPS 12 V
- 80 PLUS Certificado
- Seguridad: CB, cUL, TUV, CCC, BSMI*.
- EMI / EMC: CE, FCC, RCM*
* No aplicable a 600 W - Dimensiones: 270 mm (L) x 100 mm (W) x 70 mm (H) (600 W)
- Dimensiones: 225 mm (L) x 100 mm (W) x 70 mm (H) (460 W y 400 W)
Visión general
| H1U | L1U | H2U | L2U | |
|---|---|---|---|---|
| 80PLUS | 80PLUS | Gold | 80PLUS | Gold |
| Intel EPS1U v2.1 compliant | Yes | Yes | Yes | Yes |
| ATX 12 V v2.2 compliant | Yes | Yes | Yes | Yes |
| Dimensions | 235 mm (L) x 100 mm (W) x 40 mm (H) | 235 mm (L) x 100 mm (W) x 40 mm (H) | 400 W and 460 W: 225 mm (L) x 100 mm (W) x 70 mm (H) 600 W: 270 mm (L) x 100 mm (W) x 70 mm (H) |
245 mm (L) x 100 mm (W) x 70 mm (H) |
| DC to DC converter design | No | Yes | No | Yes |
| Forward converter circuit | Yes | No | Yes | No |
| Fully modular cables | Yes | Yes | Yes | Yes |
| Fixed cables | No | No | No | No |
| 40 mm double ball bearing fan | Yes | Yes | No | No |
| 60 mm double ball bearing fan | No | No | Yes | Yes |
| S3FC - including Fanless mode | No | Yes | No | Yes |
| S2FC - Smart and Silent Fan Control | Yes | No | Yes | No |
| Easy-swap connector design | No | No | No | No |
| Zero minimum load on 3.3 V rail | Yes | Yes | Yes* * Not applicable to 600 W |
Yes |
| Short circuit protection on all outputs | Yes | Yes | Yes | Yes |
| Over voltage protection | Yes | Yes | Yes | Yes |
| Over power protection | Yes | Yes | Yes | Yes |
| 100 % HiPot test | Yes | Yes | Yes | Yes |
| 100 % Burn-in, high temperature cycled on/off | Yes | Yes | Yes | Yes |
| Safety compliance | CB, cUL, TUV, CCC, BSMI | CB, cUL, TUV, BSMI | CB, cUL, TUV, CCC, BSMI* * Not applicable to 600 W |
CB, cUL, TUV, BSMI |
| EMI/EMC compliance | CE, FCC, RCM | CE, FCC, RCM | CE, FCC, RCM* * Not applicable to 600 W |
CE, FCC, RCM |
Galería
Especificaciones
SS-600H2U
| Specifications | |
|---|---|
| Input frequency | 50 / 60 Hz |
| Hold up time, full load | 16 ms (typical) |
| Efficiency (220 V AC - 240 V AC, full load) | 83 % (typical) |
| Efficiency (100 V AC - 120 V AC, full load) | 80 % (typical) |
| Dielectric withstand, input to frame/ground | 1800 VAC, 1 sec |
| Dielectric withstand, input to output | 1800 VAC, 1 sec |
| Line regulation | ± 1 % (typical) |
| Load regulation | ± 5 % (typical) |
| Cross regulation | ± 5 % (typical) |
| MTBF, full load @ 25 °C ambient (excl. DC fan) | > 100,000 hours |
| Active Power Factor Correction | 99 % (typical) |
| DC Outputs | ||||||
|---|---|---|---|---|---|---|
| +3.3 V | +5 V | +12 Combined | -12 V | +5 Vsb | Total continuous power | Input Type |
| 20 A | 25 A | 45 A | 0.8 A | 3 A | 600 W | 100–240 VAC |
| 150 W (max.) | 544 W | 9.6 W | 15 W | |||
